AirTouch™ F20 Maskityyny - 3 Kpl

Säästä 6,7 €
128,00 € Inkl. mva. Gratis frakt for ordre over 1000 kr
Størrelse:
Tilbehør:
Velg tilbehør
Velg Størrelse
VELG MASKETYPE

Olisiko aika vaihtaa uusi memory foam -maskityyny AirTouch F20 -kokokasvomaskiisi ? Nyt voi hankkia edullisesti 3 kappaletta maskityynyjä kerralla.

Tuote sisältää 3 kpl memory foam -maskityynyjä AirTouch F20 -kokokasvomaskiin.

Tarvitsetko enemmän kuin 3 maskityynyä? Saat maskityynyt vielä edullisemmin, jos hankit kätevän 6 kpl:n AirTouch F20 -maskityynypakkauksen

On suositeltavaa vaihtaa AirTouch-maskityyny uuteen kerran kuukaudessa. 

Myymme verkkokaupan tuotteita vain Suomeen.

Beskrivelse
+

AirTouch F20 -kokokasvomaskin memory foam -maskityyny lisää CPAP -hoidon miellyttävyyttä1. Tämä vaihdettava maskityyny mukautuu kasvojen muotoon ja antaa hyvän istuvuuden2 ja tiiviyden1 säilyttäen samalla hengittävyyden. Memory foamin ansiosta maskityynyn aiheuttama paine ihoon on vähäinen ja ihopainaumien todennäköisyys pienenee. 

  • Mukavuus1: innovatiivisen ResMed UltraSoft™ memory foam -maskityynyn ansiosta kokokasvomaskin hoitokokemus on miellyttävä ja tehokas.  
  • Luotettava tiiviys: Kevyt ja joustava memory foam -maskityyny mukautuu vähitellen kasvojen muotoon ja asettuu paikalleen tiiviisti koko hoidon ajaksi1
  • Modulaarisuus: Keskenään vaihtokelpoisten osien ansiosta voit käyttää maskissa myös AirFit™ F20 -maskin maskityynyä ja muita osia. 
  • Helppohoitoinen: Vaihdettavan vaahtomuovimaskityynyn ansiosta hoito on raikasta ja miellyttävää ja hoito vaivatonta – nopea pyyhkiminen riittää. Tätä maskityynyä ei saa pestä vedellä eikä upottaa veteen. 

ResMed tarjoaa erilaisia edullisia AirTouch F20 -maskityynypakkauksia: 

Lue käyttöohjeista asiaankuuluvat tiedot varoituksista ja varotoimista, jotka on otettava huomioon ennen tuotteen käyttöä ja käytön aikana, sekä magneettiklipsejä sisältäviin maskeihin liittyvät varoitukset. 

Kysy hoitavasta yksiköstäsi tämän lääkinnällisen laitteen käytöstä uniapnean hoidossa. 

  1. ResMedin ulkopuolinen 29.8.–19.9.2016 toteutettu 7 yön kliininen tutkimus, johon osallistui 10 potilasta. Tiedostomuodossa olevat tiedot; ID A3907045 
  2. ResMedin vuonna 2016 toteuttama 42 potilaan sovitustutkimus. Tiedostomuodossa olevat tiedot; ID 3965380. AirTouch F20 -maski on tarkoitettu potilaille, jotka painavat yli 30 kg. 

Tekniset tiedot

Valmistaja Resmed
Tyyppi ResMed memory foam cushions
Ei valmistettu lateksista Ja
Painealue 4-20cm H2O
Pakkauksen sisältö 3 x AirTouch cushions
Takuuaika 7 days
Råd
+

Tutustu oheisiin maskin hoitoa koskeviin asiantuntijoiden vinkkeihin. 

Puhdistus 

AirTouch F20 -maskityynyä ei tarvitse puhdistaa joka päivä. Suosittelemme vaihtamaan maskityynyn kerran kuukaudessa. Jos maskityynyssä näkyy selviä vaurioita, se on vaihdettava uuteen ja hävitettävä.  

Memory foam -maskityynyä ei saa upottaa veteen, sillä kastelu vahingoittaa maskityynyä ja heikentää sen tiiviyttä. Pyyhi tarvittaessa memory foam -maskityynyn pinta CPAP-puhdistuspyyhkeellä tai vastaavalla pyyhkeellä, joka ei sisällä alkoholia, ja anna maskityynyn kuivua.  

Pidä maskityyny poissa suorasta auringonvalosta. Älä käytä puhdistukseen puhdistusaineita tai -laitteita.

FAQ
+
The fabric of the AirTouch N30i is breathable and moisture-wicking2, reducing the chance that you will wake up to red facial marks1 and skin irritations. Nevertheless, it\u2019s important to keep your mask clean and make sure it\u2019s well-fitted as poor mask fit, and hygiene may contribute to irritations. To prevent skin irritation from your CPAP nasal mask, ensure a proper fit. An overly tight mask can cause pressure points, while a loose one may lead to air leaks and friction. Adjust the headgear to achieve a snug but comfortable fit. There are three cushion sizes, so you should be able to find one that\u2019s right for you to prevent irritation. To avoid skin irritation, it's essential to clean the mask daily, as oil and dirt buildup can contribute to discomfort. You can use mild soap and water to gently wash the cushion and frame. Refer to your mask user guide for advice.
The lifespan of your mask depends on how often you use it, how well you take care of it, and the environment where it's used or stored. Since the mask and its parts can be replaced individually, it's a good idea to regularly check and clean them. Replace any parts or the entire mask, if needed, and follow the "Cleaning Your Mask at Home" section of the mask user guide for advice.
To start using your AirTouch N30i nasal mask, follow these basic steps:
Position the mask:
  1. Pull the frame and headgear over your head until the elbow is positioned on top and the headgear is behind your head.
  2. Place the cushion under your nose.
  3. Tighten or loosen the headgear until the cushion fits comfortably under your nose.
  4. Squeeze the side buttons on the elbow and detach from the frame. Connect the air tubing from your device to the elbow, then reattach to the frame.
Mask setting options: Ensure that Pillows is selected in the mask setting options of your ResMed device. For a full list of compatible devices for this mask, see the Mask/Device Compatibility List at ResMed.com/downloads/masks.
Adjusting your mask:
  1. When using the mask, air will flow out of the vents in the cushion and elbow. If air leaks from the side or top of the cushion, adjust the mask fitting to improve the seal.
  2. You can position the top of the frame forward or backwards over your head until the mask feels comfortable.
Always refer to your mask\u2019s user guide for detailed instructions, as each mask has its own features.
Here's a basic guide to cleaning your mask:
  1. Disassemble the mask: Separate the cushion, frame, and headgear.
  2. Wash the components: Gently wash the cushion and frame with warm water and mild soap. Hand wash only without a bristle brush, which could damage the materials.
  3. Rinse thoroughly: Ensure all soap is rinsed off to prevent skin irritation.
  4. Air dry: Let the mask components air dry out of direct sunlight to avoid material degradation.
Make sure you read your mask user guide “Cleaning your mask at home” section.
To assemble your CPAP nasal mask, follow these steps:
  1. Connect the elbow to the top of the frame until it clicks.
  2. Insert each end of the headgear strap into the frame and fold the fastening tabs backwards. Ensure that the ResMed logo is facing outwards and is upright.
  3. Align the tab (a) on the cushion with the notch (b) on the vent, and then gently pull the cushion over the vent.
  4. Insert the ends of the frame into the cushion, ensuring that the arrows on the cushion and frame are aligned.
Always refer to your specific mask\u2019s user guide for detailed assembly instructions to ensure proper fit and performance.
Tilbehør
+

Toimitus/Palautus
+

Toimitus

  • Toimitusaika 3 - 7 arkipäivää
  • Toimitetaan valitsemasi toimitustavan mukaan joko PostNordin toimipaikkaan tai kotiin.
  • Saat tekstiviesti-ilmoituksen kun paketti on noudettavissa
  • Tilauksen tekemisen jälkeen tilauksen peruuttaminen tai muuttaminen ei ole mahdollista

Palautus

  • Palautusaika on 14 vrk toimituksen vastaanottamisesta
  • Palautuksen lähettäminen on ilmainen
  • Palautusehtomme löydät täältä

Jos sinulla on kysyttävää voit olla yhteydessä asiakaspalveluumme info@resmed.fi

Turvallisia ostoksia

Yleisimmät maksukortit

Flexible Payments

Split payment over time

Toimitus

Toimitus 3-7 arkipäivässä

 

Ilmainen palautus

Voit palauttaa tilauksesi